Desk Trim

Desk Trimmers

Manual desk top trimmer with rotating blade cutting unit mounted on a rectangular sliding bar.

Working surface in sheet stell epoxydic powder coated, with serigraphy grid to ease the cutting in different formats. marks are available in millimeters and inches, metallic components apoxydic powder coated.

Optional: two reference squares.

Max cutting thickness: 0,6mm. Usable cutting length(cm): 40, 50, 65, 80, 100.

Desk Trim Plus

Desk Trimmers

Desk top manual cutter with cutting unit and rotating blade. The working plane is an epoxydic powder paint coated steel sheet, with serigraphy grid to easy the cutting in different formats and reference set square.

Marks are available in millimeters and inches.

Max cutting thickness: 0,8mm. Usable cutting length(cm): 50, 65, 80, 100.

Desk Trim Plus 130

Desk Trimmers

Desk top manual cutter with cutting unit and rotating blade. The working plane is an epoxydic powder paint coated steel sheet, with serigraphy grid to easy the cutting in different formats and reference set square.

Marks are available in millimeters and inches.

Max cutting thickness: 0,8mm. Usable cutting length: 130cm.

Optional: Support.

Light Desk Trim

Desk Trimmers

Manual economic desk top trimmer with a rotating blade cutting unit.

Working surface in sheet steel epoxydic powder coated, with serigraphy grid to ease the cutting in different formats. marks are available in millimeters and inches. Metallic components epoxydic powder coated.

Optional: two reference squares.

Max cutting thickness(mm): 0,4mm. 5 versions with usable cutting length(cm): 30, 40, 50, 60, 70.

Electro Light Power Trim

Electric Trimmer

Electric desk top trimmer with a steel rotating blade cutting unit, particularly strong for higher cutting thickness, mounted on a rectangular sliding bar.

Working surface in sheet steel epoxydic powder coated, with serigraphy grid to ease the cutting in different formats with two reference squares and lamp.

Marks are available in millimetres and inches. Metallic components epoxydic powder coated. Provided with support in steel tubes with adjustable posts collecting fabric basket.

Accessory : roll-holder

Max cutting thickness: 1,3mm. Usable cutting length(cm): 125, 145.

Electro Power Trim Plus

Electric Trimmer

Electric trimmer with rotating blade in hardened steel, mounted on a square sliding bar. Fixed blade in painted stainless steel, mounted on a reinforced cutting plane.

Collection of trimmings: possibility of horizontal output at the back or into retrieval tray underneath. Provided with a movable guide, fluorescent wire to show the cutting line and lamp over cutting area.

Metallic components epoxydic powder coated, colour grey RAL 7035. Support in steel tubes with adjustable feet to ensure easy levelling. Sheet holder included with model 300 e 360. Accessory: roll holder and fixing bar.

Max cutting thickness: 2mm. Usable cutting length(cm): 145, 165, 210, 250.

Electro Strong Trim Pro

Electric Trimmer

Electric trimmer with two rotating blades for cutting in both directions. Particularly strong with variable speed for cutting thicker materials. Strong blade holder carriage sliding on bearings mounted on a rectangular sliding bar.

Fixed blade in painted stainless steel mounted on a reinforced cutting plane. The trimmings can be collected in a tray underneath or behind the machine using the rear exit.

It comes complete with a movable reference square, lamp over the cutting area, fluorescent wire to show the cutting line and sheet holder. Very stable stand with adjustable feet to ensure easy levelling.

Metallic components varnished with epoxide powder colour grey RAL 7035.

Max cutting thickness: 4,5mm. Usable cutting length(cm): 165, 210, 260, 320.

Electro Super Trim

Electric Trimmer

Extra precise electric cutter with independent rotating blade, particularly suitable for cutting non rigid material up to 10mm thickness. Media cut is performed in two directions. Cutting carriage at variable speed for different kinds of materials.

Cutting carriage mounted on aluminium profiles. Fixed blade in painted stainless steel, mounted on a reinforced cutting plane, lamp over the cutting area. Metallic components varnished with epoxide powder, colour grey RAL 7035.

Stand with steel tubes and adjustable feet to ensure easy levelling. Paper collecting tray. It comes complete with electric fixing bar with keyboard or the foot-pedal control. Laser ray for a better cutting precision.

Max cutting thickness: 10mm. Usable cutting length(cm): 280, 340, 520.

Electro Trim

Electric Trimmer

Electric trimmer with rotating blade in hardened steel, mounted on a sliding tube. Fixed blade in painted stainless steel, mounted on a cutting plane. Retrieval tray for trimmings included.

Provided with lamp over cutting area. Metallic components epoxydic powder coated, colour grey RAL 7035. Support in steel tubes with adjustable feet to ensure easy levelling. Accessory: roll-holder.

Max cutting thickness(mm): 0,6/0,8. Usable cutting length(cm): 100, 130, 150, 200, 250.

Universal Trim 240 - 305

Electric Trimmer

Professional vertical cutting machine with rotary blade, equipped with electric cutting head at rotary blade to obtain a perfect cut with materials of big consistency (Wood, Dibond, Forex, Acrylic, Aluminium ) up to a max thickness of 22

mm and height of 244 or 305 cm. On line a pneumatic blade is installed , interchangeable to cut semi-rigid materials like carton, foam, etc. up to a max thickness of 20 mm. As optional you can also install a blade to cut glass up to a max

thickness 2.2mm. Optional: a laser system enables to visualize and square quickly, showing clearly one or the other cutting line, Optional extensions they can be installed both on the left and right side according to the specific requests.

The picture below shows, as an example, one single extension on the left side. For the overall dimensions please consider each optional extension is about 700mm wide.

XY Matic Trim 1650

Electric Trimmer

XY automatic trimmer for sheets and rolls, designed for simultaneous cutting on all four sides.

An optical mobile sensor reads the most diverse marks to perfectly line up the prints to cut horizontally, whereas the vertical cutting units, which can be positioned manually, trim the prints as they move forward.

Different feeding, which can be selected using the control keyboard, can be used to accurately cut the most diverse types of media such as: photographic media, vinyl, plotter inkjet paper, polyester or polycarbonate film, maximum thickness of cut 0,5mm.

Easy roll loading operations, easy data set-up and the rapid positioning of the cutting units make work easy even when the rare different print formats on the roll.

Electronic controls inform the operator about any operating errors or anomalies through acoustic and visual devices.

Optional accessories: Extra front cutting unit, Kit ON-LINE and Exit Table for Kit on Line.

XY Sheet Dispenser Trim

Electric Trimmer

Semiautomatic Trim can be programmed to cut pre-printed rolls.Horizontal cutting carriage (X axis) with rotary bladesfor the vertical cut as well (Y axis).

For the vertical cut the blade is being placed manually and can be adjusted with a millimetric sliding bar.

Max cutting width 1650mm, Max cutting thickness 1mm, Horizontal cutting speed 40mt/min, Vertical cutting speed 12,5mt/min.

Electro Foam Trim Plus

Foam Trimmer

Electric trimmer with a fixed blade cutting head in hardened steel, mounted on a double sliding bar for cutting FOAM and FOREX®. Control panel. Metallic components, epoxidyc powder coated, colour grey RAL 7035.

Two cutting heads, four cutting positions of 5-10-20-30mm for different kinds of material, variable cutting speed.

Provided with stand, reference square, electric sheet-holder to block the material to cut and lateral supporting sheet.

Optional: right and/or left lateral extensions and laser ray.

Max cutting thickness FOAM/FOREX®(mm): 30/10. Usable cutting length(cm): 160, 250, 310.

Foam Trim Plus

Foam Trimmer

Manual economic trimmer with a fixed blade cutting head in hardened steel, mounted on a sliding bar for cutting FOAM (30mm) and FOREX® (3mm). Blade guide adjustable in height from 0 to 30 and spare blades.

Metallic components epoxydic powder coated, grey, RAL 7035. Provided with reference square, manual sheet-holder and upport in steel tubes with adjustable posts to compensate the impairment of the floor.

Max cutting thickness FOAM/FOREX®(mm): 30/3. Usable cutting length(cm): 125, 160.

Foam Trim Pro

Foam Trimmer

Manual cutter with a fixed blade cutting head in hardened steel, mounted on a sliding bar for cutting FOAM (30mm) and FOREX® (10mm with multi passes cut, 1mm for pass).

Blade guide adjustable in height from 10 to 30 and spare blades. Metallic components epoxydic powder coated, colour grey RAL 7035.

It comes complete with stand in steel tubes with adjustable feet to ensure easy levelling. Manual sheet-holder to block the material.

Optional: laser ray.

Max cutting thickness FOAM/FOREX®(mm): 30/10. Usable cutting length(cm): 205, 250, 310.

Foam Trim Special

Foam Trimmer

Electric trimmer with a cutting head, electrically adjustable height and hardened steel blade mounted on a double steel guide for cutting FOAM upto 32mm and FOREX upto 10mm.

Control panel for the carriage, sheet-presser bar and height of the cutting blade. 4 cutting positions 6-14-26-32 mm for different kinds of materials.

Material cutting in adjustable position, variable speed motor. Metallic components epoxydic powder coated, grey RAL 7035. Reference square. Provided with stand, electric clamp to block the material.

Optional: stand and extra modular lateral extensions.

Max cutting thickness FOAM/FOREX®(mm): 32/10. Usable cutting length(cm): 205, 250, 310.

Horizontal Electro Foam Trim Plus

Foam Trimmer

Electric trimmer with a fixed blade cutting head in hardened steel, mounted on a double sliding bar for cutting FOAM and FOREX®. Control panel. Metallic components, epoxidyc powder coated, colour grey RAL 7035.

Two cutting heads, four cutting positions of 5-10-20-30mm for different kinds of material, variable cutting speed. Provided with reference square, stand, electric sheet-holder to block the material to cut, lateral extensions and laser ray.

Max cutting thickness FOAM/FOREX®(mm): 30/10. Usable cutting length(cm): 160, 250, 310.

Light Foam Trim

Foam Trimmer

Manual economic trimmer with a fixed blade cutting head in hardened steel, mounted on a sliding bar for cutting FOAM. Metallic components epoxydic powder coated, grey, RAL 7035. Provided with reference square and manual sheet-holder.

Optional: support in steel tubes with adjustable posts to compensate the impairment of the floor.

Max cutting thickness: 15mm. Usable cutting length(cm): 105, 125.

Vertical Foam Trim Plus

Foam Trimmer

Balanced manual trimmer with a fixed blade cutting head in hardened steel, mounted on a sliding bar for cutting FOAM (30mm) and FOREX® (10mm with multi passes cut, 1mm for pass).

Metallic components epoxydic powder coated, grey, RAL 7035. Provided with reference square, support, and manual sheet-holder to block the material to cut ant two lateral supporting sheet.

Optional: right and/or left lateral extensions, kit for angular cut and laser ray.

Blade guide adjustable in height from 0 to 30 mm. and spare blades.

Max cutting thickness FOAM/FOREX®(mm): 30/10. Usable cutting length(cm): 125, 160.

Light Power Trim

Manual Trimmer

Manual desk top trimmer with a steel rotating blade cutting unit, particularly strong for higher cutting thicknesses, mounted on a rectangular sliding bar.

Working surface in sheet steel epoxydix powder coated, with serigraphy grid to ease the cutting in different formats with one reference square and lamp.

Marks are available in millimetres and inches. Metallic components epoxydic powder coated, support in steel tubes with adjustable posts collecting fabric basket for models 75, 105, 125, 145.

Max cutting thickness: 1,5mm. Usable cutting length(cm): 105, 125, 145.

Manual Trim

Manual Trimmer

Manual trimmer ideal for cutting drawings, photographs, posters, etc. A choice range of several different cutting widths. Smoot running blade carriage rotary blade in hardened steel.

Fixed blade in inox. Sheet press made of transparent plastic. Available with or without stand and retrieval tray for trimmings. Metallic components epoxydic powder coated, colour grey RAL 7035.

Optional: roll holder and lamp for cutting area.

Max cutting thickness(mm): 0,6/0,8. Usable cutting length(cm): 100, 130, 150, 200, 250.

Power Trim Plus

Manual Trimmer

Manual trimmer with rotating blade in hardened steel, mounted on a square sliding bar. Robust blade holding carriage moving on bearings. Fixed blade in painted stainless steel mounted on a reinforced cutting plane.

Stand and retrieval tray for trimmings included. Metallic components epoxydic powder coated, colour grey RAL 7035. Complete with moveable guide. Optional: roll holder and lamp over cutting area.

Max cutting thickness: 2,2mm. Usable cutting length(cm): 105, 145, 165, 210, 250.

Strong Trim Pro

Manual Trimmer

Manual trimmer with a two rotating blades for cutting in both directions. Particularly strong for cutting thicker materials, strong blade holder carriage sliding on bearings mounted on a rectangular sliding bar.

Fixed blade in painted stainless steel mounted on a reinforced cutting plane. Stand with paper collecting tray. Metallic components varnished with epoxide powder colour grey RAL 7035. provided with movable reference square.

Optional: roll holder, lamp over the cutting area and sheet holder.

Max cutting thickness: 4,5mm. Usable cutting length(cm): 130, 180, 230.

Super Trim - Textile Plus

New: for cut fabrics

Extra precise electric cutter with independent rotary blade heated up to 350°C, particularly suitable to cut natural and synthetic fabrics with bi-directional cut . Cutting carriage at variable speed for different kinds of materials.

Cutting carriage mounted on aluminium profiles. Fixed blade in painted stainless steel, mounted on a reinforced cutting plane, lamp over the cutting area. Metallic components varnished with epoxide powder, colour grey RAL 7035.

Stand with steel tubes and adjustable feet to ensure easy levelling. Paper collecting tray. It comes complete with rapid pneumatic fixing bar with foot-pedal control for free hands operations. LASER ray for a better cutting precision and roll-holder.

Electro Plexi Trim

Plexi Trimmer

Automatic cutter for rigid materials like plexiglas or dibond, available in two models for mid/big dimensions.

Cutting thickness PLEX/FOREX®(mm): 6/10.

NEOLWELD

Soudeuse de bâche

Caratteristiche tecniche NEOWELD 1300 : Technical Specifi cations for NEOWELD 1300 :
• Lunghezza elemento saldante
1300 mm.
• Heating length about
1300 mm.
• Larghezza elemento saldante 25 mm. • Heating width about 25 mm
• Pressione di lavoro 18 N per cm. • Working pressure 18 N per cm
• Fermo di riferimento posteriore regolabile • Rear adjustable reference
• Durata ciclo completo da 0 sec. a 30 sec. • Working Time from 0 sec. to 30 sec.

Machine a oeillet automatique

  Fonctionnement Automatique ou Semi-automatique - Actionnement avec commande à pédale

  Avec commande à pédale et le chargement automatique à chute permet d'avoir toutes les deux les mains libres en permettant une considérable épargne de temps.

  - Contrôlé la gestion par PLC programmabile - Boutonnières Il voile 70 (ø. Interne 16mm. ø. extérieur 28 mm)

NEOLT UNWINDER / REWINDER 1650 - 2050 - 2500 - 3200

Étudié pour l' asservissement des machines d'aujourd'hui et de demain. Possibilité de j'utilise du système à monte ou à à vallée de systèmes de coupe, de presse ou combinée, la plus grande flexibilité dans la configuration où avec un unique produit vous aurez une dérouleuse ou bien un avvolgitore comme les dynamiques exigences de production.

  En outre un système de relevé de la position du tendeure au moyen de capteurs optiques, contrôle le riavvolgimento en sens horaire ou contraire aux aiguilles d'une montre de la bobine installée. La vitesse d'exercise est gérée et contrôlée de PLC